IBM Security QRadar SIEM V7.5 Certification Exam Help

Take My QRadar Exam

The IBM Security QRadar SIEM V7.5 family is four exams — Foundations (C1000-175), Administration (C1000-156), Analysis (C1000-162), and Deployment (C1000-163) — each 90 minutes long, each $200 USD, each takable from home through Pearson VUE OnVUE or at a test center. Send your background, your window, and your deadline. Exam Assist answers honestly on feasibility, handles the sitting end to end, and charges the service fee only after the pass posts.

Last verified:

Book QRadar Exam Help

We handle the sitting. Pay only after you pass.

4
V7.5 exams in the family

Foundations C1000-175, Administration C1000-156, Analysis C1000-162, and Deployment C1000-163 — all listed Live on IBM's credential pages.

90 min
Every single exam

All four V7.5 exams allow 90 minutes, per IBM's official exam details.

$200
Per exam (USD)

Every QRadar V7.5 credential page lists 'Price per exam: $200 USD'.

38–42
Questions to pass

The published passing marks: 41 of 62 (Foundations), 38 of 62 (Administration), 41 of 64 (Analysis), 42 of 63 (Deployment).

What Each QRadar V7.5 Exam Actually Tests

Foundations (C1000-175) is the breadth exam: 62 questions, 41 to pass, across fourteen sections running from SIEM concepts and QRadar architecture through rules and building blocks, offenses, AQL search, assets, reporting, and user management. It is the credential for people new to the product who need to prove baseline fluency.

Administration (C1000-156) is the operator's exam: 62 questions, 38 to pass, across eight sections covering system configuration, performance optimization, data source configuration, accuracy tuning, user management, reporting and offense management, tenants and domains, and troubleshooting. IBM's own page states it plainly: 'Extensive hands-on product knowledge is required to pass the test.'

Analysis (C1000-162) is the SOC analyst's exam — 64 questions, 41 to pass, across five sections: offense analysis, rules and building block design, threat hunting, dashboard management, and searching and reporting. Deployment (C1000-163) is the implementer's exam — 63 questions, 42 to pass, across nine sections including architecture and sizing, event and flow integration, X-Force integration, migration and upgrades, and multi-tenancy. Note the codes: Analysis credential C9005200 replaced C9002900, and Deployment credential C9005100 replaced C9003100 — if your requirement cites the old codes, you need the current V7.5 exams.

OnVUE at Home or a Test Center: Your Room or Theirs

Pearson VUE's IBM program page states the options directly: IBM certification exams can be taken 'in person at a Pearson VUE Authorized Test Center or online with OnVUE in the comfort and privacy of your home.' All four QRadar V7.5 exams appear in Pearson VUE's IBM exam catalog under the Security group.

The at-home route runs under Pearson VUE's published OnVUE requirements: Windows 10 or macOS 14 or higher, a working webcam, microphone, and speaker with no headphones, one display only, a stable connection of at least 6 Mbps down and 2 Mbps up, and the ability to close every application except OnVUE. Virtual machines, VPNs, phones, watches, and smart devices with recording or AI features are prohibited.

Same exams, same questions, same passing marks. The difference is that your room becomes part of the sitting — check-in includes photos of you and your ID and a 360-degree room view. SOC staff working rotating shifts tend to prefer OnVUE for the scheduling freedom; candidates with shared or noisy spaces do better booking a center.

What a QRadar Certification Costs Before Any Service Conversation

Every QRadar V7.5 exam is $200 USD, listed on each IBM credential page. A failed attempt means another $200 — there is no published free retake on any of the four.

If your requirement names multiple QRadar credentials, the honest math is $200 per exam, planned across your calendar — not a bundle discount IBM does not offer.

IBM publishes preparation guides for these credentials (the Administration page links its own online prep course). Those are study aids; none of them change the published question counts or passing marks on exam day.

Where QRadar Attempts Actually Fail

Three patterns account for most failed first attempts we see.

  • [object Object]
  • [object Object]
  • [object Object]

How Take-My-QRadar Support Actually Works

1

Send the brief

Your role, the specific credential your requirement names (and its code), your deadline, and your testing window — the four exams are not interchangeable.

2

Feasibility in plain terms

We confirm the current exam details against IBM's live credential pages, pick the delivery mode and appointment window, and tell you honestly if the date or setup is wrong.

3

Environment and identity prep

Room, hardware, ID documents, and the Pearson VUE check-in flow rehearsed until nothing on exam day is improvised.

4

The sitting

Your QRadar sitting is handled end to end by a specialist who runs QRadar deployments and SOC analysis for a living.

5

Result, then invoice

The service fee is due only after the agreed result posts. If the pass does not post, there is no service fee.

What You Get

Current-format confirmation

Every format, fee, and policy line on this page re-verified against IBM's four official credential pages on 30 August 2026 — including which credentials replaced which codes.

Role-matched exam selection

Foundations, Administration, Analysis, or Deployment matched to your requirement and experience — not whichever one a checklist happened to name.

Section-complete coverage

Preparation of the sitting spans each exam's full published section list — fourteen sections on Foundations alone — not just the chapters you already know.

Delivery-mode planning

OnVUE at home versus a test center decided on your room, hardware, ID, and shift schedule — not habit.

Check-in rehearsal

The OnVUE photo, ID, and 360-degree room-scan sequence walked through in advance so exam-day check-in takes minutes, not nerves.

Is This Safe, and How Discretion Works

Discretion is operational, not theatrical. Communication stays on your chosen channel, nothing posts publicly, and your IBM and Pearson VUE details are used for your sitting and nothing else.

If something about your situation makes the sitting a bad risk — ID that will not pass verification, an unusable home setup — we say so at intake, not after.

Pay After You Pass

A QRadar attempt costs $200 before any service conversation begins. Our side is simple: the service fee is due only after the agreed result posts — never before, never in installments that happen to start early.

We do not promise a specific score. We promise the current format, a prepared sitting, and a fee that exists only on a pass.

Candidate Feedback

Our MSSP contract required the QRadar Administration cert with a 60-day window. They confirmed the C1000-156 format against IBM's page, handled the sitting, and I paid after the pass posted.
I needed the Analysis certification for the analyst role. They flagged that my old prep material was for the replaced credential — that catch alone saved the exam attempt.
Straight answer on feasibility in the first message, quiet process through the exam sitting, fee after the pass posted. Exactly what was described.

Take My QRadar Exam: FAQs

Can someone take my QRadar exam for me? +
Yes — that is exactly the service. Send your role, your window, and your deadline; your QRadar SIEM V7.5 sitting is handled end to end, and the service fee is due only after the agreed result posts.
How many questions are on the QRadar Administration exam? +
C1000-156 has 62 questions with 38 required to pass, in 90 minutes, per IBM's official credential page.
What is the passing score for QRadar exams? +
Each exam publishes its own mark: 41 of 62 on Foundations (C1000-175), 38 of 62 on Administration (C1000-156), 41 of 64 on Analysis (C1000-162), and 42 of 63 on Deployment (C1000-163).
What does a QRadar certification cost? +
$200 USD per exam on every V7.5 credential page. There is no published free retake — a failed attempt means another $200.
Can I take IBM QRadar exams at home? +
Yes. Pearson VUE's IBM program page states IBM certification exams can be taken at a Pearson VUE test center or online with OnVUE from home, subject to OnVUE's published equipment and room requirements.
Which QRadar exam should I take? +
Foundations (C1000-175) proves baseline fluency, Administration (C1000-156) suits operators, Analysis (C1000-162) suits SOC analysts, and Deployment (C1000-163) suits implementers. Your requirement's credential code is the deciding factor — check it before preparing.
Did the QRadar exams change recently? +
The Analysis credential (C9005200) replaced C9002900 and the Deployment credential (C9005100) replaced C9003100 on the V7.5 track. If your requirement cites the old codes, the current V7.5 exams are the ones that satisfy it — confirm with the issuer.
How long is each QRadar exam? +
90 minutes for every exam in the V7.5 family, per IBM's official exam details.

Book Your QRadar Sitting

Send your role, the credential your requirement names, and your testing window. You get an honest feasibility answer and a plan — and the service fee is due only after your pass posts.

Book QRadar Exam Help